Posts

#infosec Securing your #WinServ and #MSExchange with an acceptable baseline security

Securing your Windows Server with a baseline security

In short, to have an acceptable baseline security for any Windows server you need to think all of the things below in this list.
Sadly enough, even if you follow all of these steps, you’re still not secured forever and ever. There’s no such thing as absolute security. That’s just the way it is but you might use this as some kind of checklist and also the links provided in this post.

Syspeace logo

Syspeace logo

Securing Windows Serves with an acceptable baseline security

1. Make sure all of your software is updated with all security patches. This includes the Windows operating system but also Adobe, Java,Office and any software really. This reduces the risk for so called 0day attacks or your server being compromised by software bugs.

2. Make sure you have a good and not too resource intensive antivirus running on everything. Personally I’m a fan of F Secure PSB for servers and workstations for lots of reasons. It’s not just a pretty logo.

3. Verify you have thought your file and directory access structure and that users and groups are only allowed to use and see what they’re supposed to. Setting file permissions is a very powerful tool to secure your server and crucial.

4. Always make sure to read best practices for securing applications and servers and Google for other ideas also. No manual is the entire gospel.

5. Enable logging. If you don’t know what’s happeing, you can’t really react to it can you ? It also makes any troubleshooting hopeless in restrospect.

7. Have a good monitoring and inventory system in place such as the free SpiceWorks at http://www.spiceworks.com

8. If your server has any monitoring agents from the manufacturer such as HP Server Agents, then install them and set them up with notifications for any hardware events to be prepared.

9. User Group Policies. It’s an extermely powerful tool once you start using it and it will make you day to day operations much easier.

10. If your server is reachable from the Internet, use valifd SSL certificates. They’re not that expensive and any communications should be encrypted and secured as fa as we’re able. Yes, think Mr. Snowden.Think NSA.

11. Disable any unused services and network protocols. They can be a point of entry and for the unused network protocols, you bascially fill your local network with useless chatter that comsume bandwidth. This also goes for workstations and printers and so on.

12. Enforce complex password policies! You won’t be well-liked but that’s not what you get paid for.
If people are having trouble remembering passwords the have all over the world, maybe you could have thme read this
http://jufflan.wordpress.com/2012/11/03/remembering-complex-online-passwords/ and on the topic of online passwords and identities also, http://jufflan.wordpress.com/2012/11/03/reflections-on-theft-and-protection-of-online-identity-on-the-internet-who-are-you/

13. Use a good naming standard for user logins. Not just their first name as login or something too obvious. Here’s an old blog post on why http://syspeace.wordpress.com/2012/10/21/securing-your-webmailowa-on-microsoft-exchange-and-a-few-other-tips/

14. Backups! Backups! and again. BACKUPS!!
Make sure you have good backups (and test them at least once a year for a complete disaster revovery scenario) and make sure you have multiple generations of them in case any of them is corrupted, preferrably stored offsite in some manner in case of a fire, theft or anything really.
For day to day operations and generation management I highly recommend using the builtin VSS snapshot method but never ever have it instead of backups.
You can also use the built in Windows Server backup for DR as described here http://jufflan.wordpress.com/2013/07/15/using-windows-server-backup-20082008-r2-for-a-disaster-recovery-from-a-network-share/

15. You need to have an automatic intrusion protection against brute force and dictionary attacks with Syspeace since the “classic” methods do not get the job done. Here’s an older blog post on why http://syspeace.wordpress.com/2013/07/11/using-various-brute-force-and-dictionary-attack-prevention-methods-to-prevent-hackers-and-why-they-dont-work-repost/ . I you don’t have the time to read the article then simply download the free Syspeace trial, install it and you’ve set up a pwerful and easy to use bruteforce prtection for your server in minutes.

If you’re up for it, I’ve written a few other related posts here:

http://jufflan.wordpress.com/2012/10/22/securing-your-server-environment-part-1-physical-environment/
and
http://jufflan.wordpress.com/2012/10/22/securing-server-environments-part-ii-networking/

By Juha Jurvanen @ JufCorp

Syspeace 2.1.0 with SQL Server, Server 2012 support and more

Syspeace (@Syspeace) tweetade kl. 9:32 EM on tors, apr 18, 2013:
New version, 2.1.0, released today! Support for #SQLserver, #WinServ 2012 and all new Access Reports

Get the new version or free trial at
/downloads.aspx

Syspeace license password reset

Hi, all.

As all of you know, we put a lot of effort and work into getting various features and improvements in place to help you protect your Windows 2003/2008/2008R2 and the Windows Server 2012 support coming up , Terminal Servers, Sharepoint Servers, Citrix Servers, Exchange Servers and so on.

We’re just so into making Syspeace the nr 1 product for intrusion prevention for Windows servers and a natural part of any Windows servers baseline security so that’s where our main focus is.

From time to time, our administrative efforts get left behind.

One of the most common questions , acually by far the most common question, emailed to our support is that when you wanted to buy a license for Syspeace, you’d forgotten your password and we provided you with a password reset link manually.
From one point of view, we’re happy to talk to you guys and help you out but of course, a password reset thing should be automated to help you get your licenses as soon as possible.

So, finally, we’ve now implemented a “Password reset” feature on the licensing page. Simply fill in the emailaddress you used when you registered and a password reset link will be emailed to you.

We’ve also got the instructions more clearly into the email you receive when you buy a license that you actually won’t have to do anything.

The trial license you’re running will be automatically verified as a valid, live license the next time your Syspeace contacts the license server.

So, in short, you won’t have to wait for a license number to be sent to you since you’ve already got it.

PS. As a heads up, we’ll be releasing the SQL Server support and we’re also working on a GUI feature to easily sort, search, find and export various reports to CSV files D.S.

by Juha Jurvanen

How Syspeace licensing works

Syspeace licensing – a walkthrough

The licensing model for Syspeace is very flexible and easy to use and has been to designed to keep your administrative tasks to a minimum.

First of all, if you haven’t already, download a free trial and install it. Your servers are protected from brute force and dictionary attacks within minutes.

Regsiter your account with a valid email address and a license number will be emailed to you.

If you decide to continue using Syspeace for protecting your Windows servers, Exchange Servers OWA, Citrix, Terminal Server, CRM, RDWEB, Sharepoint and so on then ..

Simply login to the Syspeace licensing site with the mail address you used upon registration, buy your license and the trial license you’ve used earlier will be automatically converted into live license the next time your Syspeace client validates the license or the service is restarted.

So, there is no need to change the license number , you’ve already got it .

A main feature of the Syspeace licensing model is the flexibility – rethinking application licensing models

Instead of having to buy licenses for instance a 1 year licens at a time per server (which is not uncommon) or having to buy a new license / upgrade license when a major release is up , you buy licenses based on computer days and for how many servers you want.

As an example. If you’ve got a server today and you want to get a “classic” one year licese for it (everyone tends to think in terms of one year licenses I guess) , you login to the site, get your license and you’re good to go.

Two months later, you buy another server and of course you want that server also to be protected from brute force and dictionary attacks.

Ususally this would get you into the situation where you’d have two different license renewal-dates to remember and that’s just a hazzle for everyone.

With Syspeace though, you simply login and extend your existing license for 10 months and to two servers, thus enabling you to align your license renewal dates to tha same date and therefore simplifying your administration.

With Syspeace minor and major upgrades and even all new versions and patches are included in the license.
Should we release new features or a new major version, it’s already included.
No need to buy a license for version 1 thinking all is good and when version 2 comes along , you realize you’ll have to get an upgrade license to use all the new features.

Moving Syspeace licenses between servers

Also another feature that makes you life easier.

Within the licensing section of Syspeace, there is a “Reset license” button. Simply press that and the license is reset from the local server and the server is removed from the central database along with its affilation to the license number.

Next step is to install Syspeace on the new server where you want it, activate your license key and you’re good to go.

How to setup syspeace for rdp – intrusion prevention for Windows servers

This is actually just a post based on some of the search terms that have led to people finding this blog.

So,

how to setup syspeace for rdp

..
Actually , it might take you longer to read this blogentry than actualy set it up.

1. Go to the Syspeace website and download the software at /downloads.aspx

2. Read the requiremnets in the manual:

System requirements
Operating system: Windows 7, Windows Server 2003, Windows Server 2008/2008 R2 (32 or 64 bit), Windows Small Business Server SBS 2008 and so on . (We are currently working on the Windows Server 2012 validation and we have tested it successfully but in certain scenarios the source IP address isn’t displayed in the evenlog. This is a Windows Server issue)
.Net 4 (if not installed, it wil be installed for you )
1GB free disk, minimum 500M RAM.
Auditing
Auditing for failed login and successful log in switched on in local security policy or in the group policy for the domain. This will enable events in the event-log that Syspeace listens for.
Firewall
The built-in firewall in Windows must be up and running.

3. Install Syspeace which is quite straight forward

4. Start the GUI and type in a valid mailaddress to get your 30 day free trial license key emailed to you. This emai address is also going to be the account emai you need tp use when purchasing the license.

4. Paste the license number and the GUI will start.

5. By default, the Syspace service is NOT started.

6. Cllick teh Settings button and review the default rules (called the “Catcha all” rule” and alse set up messaging for blocked attacks (whom to alert, whom to emai license inforamtkion and so on )

7. Close the Settings section. Click the “START” butto and you’re done.

Now, your Windows server is instantly protected from brute force and dictionary attacks against youe Exchange Webmail OWA, Terminal Servers on RDP (terminal services, remote desktop services, remote app sessions) and the webinterface called RDWEB, your Sharepoint login , your Citrix server, winlogon services and even more.

There’s really not that much more to it.
Since the intrusion prevention for Syspeace monitor the Windows Server Evnetlog , it doens’t matter if you have set up RDP on other ports or if you are using a proxy. Sysoeace is a HIDS (Host Instrusion Protection System) thus eliminating the need for separate hardware, expensive consulans and redesigning you infrastructure.

Just sit back and start recieving resports and emails when an attack is blocked, tracked and reported.

Securing Cloud services from dictionary attacks – hack yourself and check your Cloud providers / outsourcing providers security and response

The more we move our data to various Cloud services and to outsourcing companies, we also need to take the consequences into account what that means from a security perspective.

Prior to a move to Cloud services, a company could keep track of how communications are secured, they could set their own account lockout policies and monitor all logfiles in order to keep security at the desired level.

With the popularity of Cloud services becoming more widespread, a lot of the possibilities for this kind of control and tightened security has disappeared. As a Cloud user you rarely get any indication that someone is for instance trying to use your username and password to gain access to your, for instance , your Microsoft Exchange Webmail , also called OWA.

A hacker can probably try to guess your password with a brute force attack or dictionary attack for quite some time and nothing really happens. The protective measures at the Cloud service provider are most likely unknown to you and you will not get a notification of that something might be going on.

An easy way for you to verify this is actually to try hack yourself. By this I mean, try to login to you account but with an invalid password. See what happens. Is your account locked out? Does the OWA disappear for you, indicating your IP address has been locked down by some security countermeasure?
Are you as a customer and user notified and alerted in any way of the attempt? This is of course also a simple test you can do against you own companys webmail if you want to, although the server team won’t like it when you point out the problem.

Keep in mind that it would take quite some time to do each logon manually but hackers don’t do this manually. They use special software for this that is freely available for download and they can render thousands and thousands logon attempts in  few minutes.

From the Cloud Service provider point of view, this has been a big problem for years. Brute force prevention and dictionary attack prevention on especially the Windows server platform has always come with lots of manual labor and high costs so it’s usually not even dealt with.

From the user point of view, there’s not that much you can do about it reslly more than verify what happens if you try and then ask your service provider for a solution if you’re not happy with the result after hacking yourself.

If you’re running Virtual Private Servers (VPS) with Windows you should consider this also but as a Cloud Service provider should.

As an important piece of the puzzle of the security systems that need to be in place, and as a natural part of the server baseline security configuration, have a look at Syspeace , an easy to use, easy to deploy and configure brute force prevention software that automatically blocks the intruders IP address,tracks it and reports it to the system administrator. Without causing the legitimate users account to be locked out and with no manual intervention at all.

Syspeace works by monitoring the servers eventlogs and is triggered by unsuccesful login attempts as alerted by a process called Windows Authentication.

With this method, there is out of the box protection for Citrix, Microsoft Terminal Server, Sharepoint, Exchange Server and more. There is also a Global Blacklist, offering preemptive protection from well known hackers around the world.

If you’re a Cloud Service provider or if you running or hosting any Windows servers you want protected, download a free trial from Syspeace trial download and see for yourself how easily you can get rid of a big problem and, at a low cost.


Posted with WordPress for Android.
Juha Jurvanen
Senior IT consultant in backup, server operations, security and cloud. Syspeace reseller in Sweden.

JufCorp

Syspeace saves time and money blocking brute force attempts. So far we’ve saved 4 292 968 US$

This is just a geeky, cost calculating experiment really. Nothing scientific or anything. Just a fun thought on how easy it is to calculate the ROI for the low cost of Syspeace licenses.

Yesterday evening we had a really interesting meeting with a future reseller so we thought we’d take a look at the actual numbers of blocked attacks.
Syspeace had blocked over +314 000 brute force attempts on Windows servers worldwide.

This morning I started thinking.

If each attack takes 15 minutes to manage manually with these steps
1. Find the IP address of the attacker in the event viewer, then block the attack (in the internal or external firewall)
2 Trace the origin (using traceroute, nslookup and whois) and log it somwhere
3. Decide if it’s worth following up and making ot a police matter

That would mean we’ve saved 314 000 * 15 minutes = 78 500 man hours of manual work around the world.

The US$ is about 6.8 Swedish Cronas today.

If each tech has a salary of 35 000 (approx. 5100 US$) per month (an average tekkie salary in Sweden)  the average hourly salary is 218 Swedish Krona (32 US$) .

For the employer , that number is about the salary time 1,7 (due to taxes and stuff ) so that would basically amount up to 371 Swedish Krona as a cost for the employer.

What we saved in manual labor with Syspeace would be 78 500 * 371 = 29 192 187 Swedish Cronas (or 4 292 968 US$) in actual cost savings bot most of all, we’ve made the life of the sysadmin easier and he can focus on other stuff than managing brute force attempts and let Syspeace do the work.

A lot of IT projects could do with an extra 78 500 man hours..

If you’re up for cutting costs and increasing security at the same time, have a look at the free trial download at the Syspeace website

A thought by Juha Jurvanen @ JufCorp
 

 

Various brute force prevention methods for Windows servers – pros and cons

Intro on brute force prevention tactics and some misconceptions

Protection from brute force attempts on Windows servers has always been a nightmare and would continue to be so if not .. Yes, I admit, I will come up with a solution further down.

Most system administrators with selfrespect start off with the best of intentions to actually keep track of brute force attempts but eventually give up because of the sheer number of attacks that occur daily.

Others, unfortunately, believe that a firewall takes care of the problem which it doesn’t or that an account lockout policy is the answer. Neither of them is and I’ll show you why.

The firewall approach:

Think about it. What does a firewall actually do ? The role of the firewall is to block traffic on unwanted ports and to drop portscans and variuos SYN FLOOD attacks. That’s about it. A firewall is basically a harsch doorman deciding who gets in to speak with the guys on the inside and who doesn’t.

If an attacker actually connects on a valid port , the traffic is redirected/port forwarded to the server in question let’s say the webmail interface of a Microsoft Exchange Server or a Microsoft Windows Terminal Server or a Citrix Server. Once the attacker is there, the actual logon request is handled by the server,not the firewall. The logon process is managed by the Windows Authentication process (which in turn may be validated against Active Directoy or a local user database using SAM). The firewall is already out of the picture really since it has no connection with the Windws server apart from  the TCP connection and keeping it alive really. They don’t communicate the result of the logon process between eachother.

Also, a changing of from standard ports won’t help you much, will it ? The logon process is still managed by the Windows Server although you will get rid a of a lot of portscans and “lazy background, script kiddie attempts” if you’re using non standard ports. Basically you get rid of the script kiddies but the problem isn’t solved, the traffic is still redirected/port forwarded to the server that does the actual authentication.

Using for instance a Remote Desktop Gateway won’t handle the problem either. Using a RDP Gateway minimizes the attack surface, yes, but it is still reachable and the user logons still have to be validated. The problem is with any server that services logon request basically, regardless of on what ports and how they get there. That is Microsoft Windows server, Exchange Server, Citrix, Sharepoint, CRM , Terminal server and so on . The list can probably go on and on.

There’s also the risk of stuff stops working each time you apply some updates or patches to your Windows Servers if you start changing standard ports or standard configurations. It’s happened to me a few times and it’s not that amusing to be honest when you’ve got 1000 users not being able to log in beacuse you’ve just done your job and patched the servers to keep peolpe datas safe. Trust me, that’s not a good Monday morning.

The VPN approach:

Yes. That’s a safer approach but also here we do have some issues. First of all, it’s not that easy to keep track of VPN certificates, to set all of it up and manage all the licensing costs (that can be quite significant really ) and (sometimes costly) hardware you need to have in place. Historically there has also always been performance issues with most VPN solutions since all traffic is directed through one or a few VPN servers / connectors. Some of them also charge you for the bandwidth you want it to be able to use for VPN connections or charge you for the number of simultaneous VPN connections, A VPN solution can be quite costly as an initial investment and taking into account all of the administration involved in it.

You also probably won’t be demanding your users to have a VPN connection to the Microsoft Exchange OWA etiher snce the whole idea of the OWA i that it’s supposed to easy to reach from anywhere. I know there are some companies actually requiring VPN even for OWA and that’s just fine I guess but the more we’re moving our data and applications to cloud services, this hassle with different VPNs and stuff will eventually be fading into the dark corners of the Internet (that’s my personal belief anyways). The thing is that your users don’t want to be tied down by complicated VPN clients and stuff, users nowdays are used “stuff just working” and it has to be easy and intuititive for them. The days of the “System Administrators from Hell” implementing all kinds of complex solutions to keep stuff secure and forcing users to having very specific and complex ways of accessing data are over. They were good times, good times but they’re over. Deal with it.

The IDS/IPS approach:

Using a centralized IDS/IPS This is a more efficient method, yes. The downside is, most of these systems require you to change your infrastructure and get specific, costly hardware, licenses and costly consultants to get it up and running. And someone needs to monitor it, take care of it and so on. There are parllells to the VPN approach here although an IDS/IPS does a while lot more such as examines all the network traffic, examines it for malicious code and so on. I’m not sure actually if an IDS/IPS can communicate with the Windows Server Authentication Process so I’ll actually won’t say anything about that. I would presume they can, otherwise I fail to see the point (from the brute force logon prespective, that is) and you’d still need to handle the logon attempt on the Windows server.

The Account Lockout Policy approach:

The acccount lockout method is also flawed due to the fact that an attacker can quite easily cause a DOS (Denial of Service) simply by hammering your server with invalid logon request but with valid usernames, thus rendering the accounts unusable for the valid users. Basically, all he (or she)  needs to know is the user logon name and in many system , it’s not tha hard to guess (try the companynameusername or the mail address for the user since it’s quite often also a valid logon name if you have a look at the properties of the user in Active Directory Users and Group snap-in)

The Cloud Computing approach

We are shifting  more and more of our data and applications into various Cloud Services (like it or not but, it’s a fact and you know it). This way we do get rid of some of these problems on our own servers and hopefully, your Cloud Service provider actually has a plan for these scenarios and has the necessary surveillance software and systems in place. If you’re using a Cloud Computing platform based on Windows Servers, you should actually ask your provider how they handle brute force attempts on their servers. Most likely they will give you one or more of the scenarios described above and, as I’ve showed you, they are not adequate to handle the task at hand. They’re just not up for the job. Feel free to ask your own provider and see what answer you get. My guess is .. mumbo jumbo but basically , they don’t have anything in place really, more or less.
You could even try logging into you own account with your own username but the wrong password loads of times and see what happens. Will it be locked out? Will your machine be locked out? How does your Cloud Srvice Provider respond and are you informed in any way that an intrsuion attempt has been made using your account ? How many times can anypne try to access your account without you being notifed of it? And from where are they trying to get to your data and why?
Personally I know of only one Cloud Service Provider that has also taken these questions into account and that’s Red Cloud IT in Sweden.

Is there a solution then?

Yeah. I told you so in the beginning and even if choose not to use what I suggest, I highly recommend that you start thinking about these things properly because these problem will accelerate in the future. Just take a look at all the hacktivism witj DDOS attacks,going on out there. It’s just a start because the Internet is still young.

First of all, and this is extremely important you realize, , it doesn’t matter if you hosting your own servers or if you’re using VPS (Virtual Private Servers) hosted somewhere else or even if you’re a Cloud Service Provider. The basic principal stands: if you are providing any kind of service to users using the Windows Authentication mechanism you should be reading this and hopefully my point has come across.

If you’re having brute force attacks on your Windows systems today and I’m pretty sure you do (just turn on logon auditing and I’m sure you’ll see you have more than you actually thought you did, *for some odd reason this is NOT turned on by defaut in Windows*) there’s a few things you should be doing (that I’m guessing you’re not beacuse you’re not a cyborg and you need to sleep, meet your friends and family and actually be doing something productive during your work hours). On the other hand, if you are doing all of these things I’m guessing you have quite a large IT staff with a lot of time on their hands. Good for you. Call me and I’ll apply for a position.

First of all. Block the attack.

You need the attack to stop! Instantly. This is of course your first priority That’s basically blocking it in the firewall, either in the local Windows firewall or the external one, it’s actually up to you which way is the easiest one. The reason is that you don’t want to be wasting CPU and RAM and bandwidth on these people (or botnets)  and of course, you don’t want them to actually succeed in logging on (should you have a lousy password policy in place ) or even them disguising a real intrusion attempt behind a DDOS attack to fill your logfiles and hide themselves in there. (Yes, it’s not an uncommon method). There’s also quite a few reports of DDOS attacks being used to disguise the actual reason for it which is to find out what security measures are in places for future reference. The “know your enemy principal”.

Second. Trace the attack. From where did it come?

Second , you need to find out from where the attack originated and what username was used. This is because you want to know if it is a competitor trying to hack you and access your corporate data or if you find yourself in the interesting position of your own username trying to login from sunny Brazil and you’re just not in Brazil (although you’d love to be) . You’re in Chicago looking at winter. Somethng’s up.
You also want to see if it’s a former employee trying to log on and so on .. This is stuff you need to know and keep track of since there may be legal issues involved further down the line.

Points one and two , you want to be handled in real time. There’s no use for you to find out two days after the attack that something actually happened. You want it stopped, reported and handled as it happens.

The legal stuff.

Third, you need to decide what to do with your information. Should it be handed over to the legal departement, your boss, the police or is it just “nothing” and can be discarded ?

So. “What would you suggest as a solution then” ? 

The easiest and most cost efficient way to handle brute force attacks on Windows server is to have an automated sysem to block, track and report each attack and that’s where Syspeace comes into play.

Syspeace is a locally installed Windows service, thus using a minimum of system resources,  that monitors the server for unwanted logon attempts and blocks the intruders in real time in the local firewall based on the rules you’ve set up. For instance “if this IP address has failed logging on 20 times during the last 30 minutes then block it completely for 5 hours and send me an email about it”

This means that you can for instance set up a blocking rule that is you “Account lockout policy – 1” in your rules and that way simply blocking the bruteforce attack but not locking your users accounts and causing them unecesseray disruption.

Since Syspeace monitors the Windows Authentication logon oprocess, it doesn’t matter what firewall your using or what ports you’re using, the monitoring and blocking is done where the actual login attempts is made and therefore caught and handled automatically.

Once the intruders IP address is blocked, it’s blocked on ALL ports from that server which means that if you have other services also running on it (like FTP or well.. anyhting really) those ports and services are also protected instantly from the attacker. Not giving them the chance to find other ways of gaining access to that server through exploits.

A few other features in Syspeace

A few other nice features with Syspeace is for instance the GBL (Global BlackLlist) where every Syspeace installation around the world , reports each attack to a databse where they are examined and weighed and , if deemed “meneace to Internet and all of mankind” the database is then propagated to all other Syspeace installations. In this way, you’re preemptively protected when the bad guys come knocking on your door. So far , there has been over 200 000 brute force attcks blocked by Syspeace worldwide (and that’s just since mid July 2012) and some of them have made it to the GBL. Lucky them.
Of course there are white lists and stuff, giving you the ability to have your customers or internal users keep hammering you servers all day long if they (and you) want  without being blocked out.

There’s also the Attack Cintrol section that gives you the ability to sort out information about successful and failed logons, findind the ones that are trying to stay under the radar, viewing reports.
You get daily and weekly reports email to you and each attack is also mailed to you with detailed but easy to understand information from where the attack originated including country, what username was used and how many times they actually tried to hack or overload you. This gives you the ability to quickly see of it’s something you should be taking care of or just carry on with your working day and leave it be with a smile on your face.

The GUI is easy to use (and there’s an even easier coming up in the next version) so there’s no need to hire costly consultants to be up & running or start using various scripts and change parameters in them to suite you needs and hope for the best and hope they don’t hang your servers.

Syspeace also protects the Microsoft Exchange Server Connectors from being attacked.

There is a Windows 2003 version coming out and there will be more features added as we go. The roadmap and to-do list is ..well.. extensive to put it mildly.

The licensing is not steep, I’d even dare say cheap and it’s extremely flexible.

As an example. If you buy yourself a new server today (evereybody loves new toys ) , you install Syspeace on it and then you get yourself a second server in 4 months. You can easily align the licensing renewal dates for both servers , not having to keep track of licensing renewals scattered over the entire year. If you’re up for , you could even byt yourslef just a one months license. Or a week. I’s up to you and what needs you have.

Download a free trial and see for yourself.
We know it works and so does all of the people around the world who are already running it.

Syspeace – let the silence do the talking

Syspeace logo

Syspeace – bruteforce prevention for Windows servers

 

Blog post written by Juha Jurvanen
Senior IT consultant in backup, IT securiy, server operations and cloud

Today we reached over +200 000 blocked brute force attempts on Windows servers worldwide – Syspeace

Syspeace  helps Windows administrators handle the gruesome tasks of tracking, blocking and reporting brute force attacks on Windows servers.

Through the use of the GBL (Global BlackList) Syspeace users are preemptively protected from brute force attacks so to be honest, the number could actually be higher than 200 000 so far since the attackers once reported into the GBL are alreday blocked and thus not reported again into Syspeace.

Syspeace monitors incorrect login attempts on Windows servers, Exchange Servers, Citrix Server, Terminal Servers, Exchange OWA, Terminal Server RDWEB and more

Download a free trial of Syspeace and see for yourself how easily you can prevent intrusion attempts on your Windows server and cut your costs on administration. Installation and configuration within minutes. After installation and starting up the Syspeace service you are instantly protected..

And no additional assembly required.

No need for new and specialized hardware with runaway licensing costs,no need changing all of your infrastructure to implement a new IDS/IPS system and no costly security consultants. It’s just that easy.

Syspeace – let the silence do the talking

Syspeace - Brute force protection for Windows servers

Syspeace logo

 

175 000 + brute force attacks on Windows automatically blocked so far by Syspeace

We had a look at the number the other day and since July 15:th we’ve successfully helped system administrators avoid over 175 000 brute force attempts on Windows servers world wide.

One of the key features in Syspeace is the GBL (Global Blacklist) that automatically analyzes and weighs every attack on every Syspeace installation and distributes the ones deemed too recurring to all other installations , thus making each Syspeace protected preemptively when the attacker comes to visit.

Syspeace is designed to automatically block, trace and report the brute force attack , thus giving system administrators less headache with all of the manual steps that has to be done for each attack. This means lower costs for administration and security work.

We thought it might be worth mentioning .

Download your own free 30 day trial at /downloads.aspx

Cheers

 

Juha Jurvanen and the Syspeace team